Description
- Article : Houston
- Category : S1 SRC
- Sizes : 3-12
- Weight : 550
- Type : Low Cut
- Color : Black
- Upper : Embossed Leather
- Thickness : 1.8-2.0 Mm
- Lining : Spacer fabric Red
- Sole : Pu Single Density Direct Injection
- Sock : Fabric Lined Sponge Foot-bed (Anti-static Thread Stitching)
- Counter/Stiffner : Heat activated thermoplastic moulded
- Insole : Anti-static Non-woven As Per Ce En 20345:2011
- Toecap Material : Steel toe cap 200 Joules as per EN 12568:1998 & 2010
- Mid Plate : Anti perforation midsole(P)
- Thread : Nylon
- Eyelets : Rust Proof
- Laces : Nylon brown round 90cm
- SRA : Slip resistance on ceramic floors with sodium lauryl sulphate (SLS). Heel > 0.28, Flat > 0.32
- SRB : Slip resistance on steel floors with glycerol. Heel > 0.13, Flat > 0.18
- SRC : SRA + SRB
| Requirements EN ISO 20345:2011 |
Test Results | |
|---|---|---|
| Lining | ||
| Water Vapour Permeability | mg/cmq*h >= 2 | 5,5 |
| Water Vapour Coefficient | mg/cmq >= 20 | 50 |
| High Voltage Test | ||
| Observation : | No Break down occurred at 15 KV | |
| Requirements : | No Flashover/Break down shall occur till 15 KV for 1 min. | |
| Anti-perforation Midsole (Optional) | ||
| Penetration Resistance (EN ISO 12568:2010) | N >= 1100 | >= 1100 |
| Sole | ||
| Abrasion resistance: relative volume loss | mm >= 150 | 45 |
| Flexing resistance: cut growth | mm >= 4 | 1,5 |
| Resistance to fuel oil: volume increase | % >= 12 | 1,1 |
| Energy absorption of seat region | J >= 20 | 23 |
| Slip resistance on | 7 Heel >= 0,13 | 0,15 |
| steel ground with glycerine | Flat >= 0,18 | 0,19 |
| Slip resistance on | 7 Heel >= 0,28 | 0,33 |
| ceramics ground with detergent | Flat >= 0,32 | 0,36 |
Reviews
There are no reviews yet.